- Código do produto: eleafpico
- Disponibilidade: Em Stock
Sem iva: 38.62€
iStick Pico Kit (New Colors)
The iStick Pico, just like its name, is
preferable, innovative, compact and outstanding (PICO). Powered by
single interchangeable 18650 cell, it provides you with 75W maximum
output and switchable VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR modes. With top
e-liquid filling design, hidden airflow control and detachable
structure, the new MELO III Mini is the best match for the iStick Pico.
Thread type: 510 thread
Cell type: High-rate 18650 cell
Cell type:(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-75W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range:0.1-3.5ohm (VW/Bypass mode)
Temperature range: 100－315℃/200－600℉ (TC modes)
Color: full black, brushed silver, hot pink, black, grey
silver, white, jet black bronze, white bronze
dazzling, red crackle, brushed black silver
brushed gunmetal, wood grain
MELO III Mini:
Thread type: 510 thread
Material: 304 stainless steel
Color: Silver, black
||1×iStick Pico (without cell) 1×MELO III Mini Atomizer
||1×EC 0.3ohm Head 1×EC 0.5ohm Head
||4×Seal Ring 1×USB Cable 2×User Manual
Tiny and Cute Appearance
With a compact size, you can hold the kit in the palm, much more convenient for usage and portability.
TC-SS and TCR Modes Available
the compact size, the iStick Pico allows an intelligent but yet
satisfying draw with 75W maximum output and switchable
Interchangeable 18650 Cell
Users can carry spare cells when on the go and change the cell easily by removing the battery cap only.
All the parts of MELO III Mini can be detached, bringing more convenience in reassembling and cleaning.
510 Spring Connector
It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.
Unique Bottom Design
ventilation holes at the bottom are for better heat dissipation and the
adjustment buttons are located at the bottom as well.
Micro USB Port
The 18650 cell can be charged in the iStick Pico through the side USB
port via 1A wall adapter or computer or charged with an external battery
charger. The recommended way is to charge the cell externally as it
will take less time to give the cell a full charge.
upgrading: The firmware can be upgraded by connecting the device with a
computer through the USB port via a micro USB cable.
1×iStick Pico (without cell)
1×MELO III Mini Atomizer
1×EC 0.3ohm Head
1×EC 0.5ohm Head